ZWY80 wheel belt slag slag machine is a kind of high-efficiency ore-mining equipment for continuous production. It is mainly used for loading operations in railway tunnel construction, mine roadway and large slope roadway tunneling, water diversion tunnel and national defense cave construction.
The ZWY80 wheeled belt slag slag machine pushes the rock into its own belt conveyor. The conveyor unloads the rock from the tail into the dump truck or mine car. At the same time, the backhoe can be used to extract the rock in the distance. Use a bucket to clean the work surface.
The ZWY80 wheel belt slag slag machine is suitable for the roadway section of 2.4x2.4m2 or more, the climbing capacity is 15 degrees, and the maximum working surface slope is 6 degrees. The main motor power
15/18.5kw, total power 20.5/18.5kw, safety valve opening pressure 13-15Mp.
Hengnuoxin 1.2 m 50 wheel belt slag slag machine specific model is ZWY-80/15kw CDQ
Z: Load W: Excavation Y: Hydraulic 80: Loading capacity 15kw: main motor power
C: Diesel engine D: Electric start Q: Enhanced type
Item parameter item parameter
Loading capacity (T/h) 80 Unloading height (mm) 1650
Vehicle weight (Kg) 3600 Unloading length (mm) 1700
Wheelbase (mm) 1650 The highest point of the tail (mm) 2250
Track (mm) 1530/1470 Gradeability (degrees) 15
Minimum turning radius (mm) 5000 Maximum working surface slope (degrees) 6
Conveyor speed (M/s) 0.63 Maximum oversize 800*600
Walking speed (M/s) 0.9 Main motor power (Kw) 15/18.5
Ground clearance (mm) 240 drum or cooling motor power (Kw) 5.5
Excavation height (mm) 2200 total power (Kw) 20.5/18.5
Excavation width (mm) 3800 relief valve opening pressure (Mp) 13-15
Loading width (mm) 1750 length (mm) 5700
Excavation distance (mm) 1600 width (mm) 1850
Applicable roadway section (m2) 1.8*1.8 or above High (mm) 1750