ZWY70 wheel belt slag slag machine is a continuous production high-efficiency mining equipment, mainly used for railway tunnel construction, mine roadway and large slope roadway tunneling, water diversion tunnel and national defense cave construction.
The ZWY70 wheeled belt slag slag machine pushes the rock into its own belt conveyor. The conveyor removes the rock from the tail into the dump truck or the mine car. At the same time, the backhoe can be used to pick up the rock in the distance. Use a bucket to clean the work surface.
ZWY70 wheel belt slag slag machine is suitable for the roadway section of 2.2x2.2m2 or more, the climbing capacity is 15 degrees, the maximum working surface slope is 6 degrees, the main motor power is 15kw, the total power is 20.5kw, and the safety valve opening pressure is 13- 15Mp.
Hengnuoxin 1.5 m 70 wheel belt slag slag machine specific model is ZWY-70/15kw CDQZ
Z: Load W: Excavation Y: Hydraulic 70: Loading capacity 15kw: main motor power
C: Diesel D: Electric start Q: Enhanced Z: Folding
Item parameter item parameter
Loading capacity (T/h) 70 Unloading height (mm) 1520
Vehicle weight (Kg) 3200 Unloading length (mm) 1500
Wheelbase (mm) 1500 tail maximum point (mm) 2250
Track (mm) 1220/1250 Gradeability (degrees) 15
Minimum turning radius (mm) 5000 Maximum working surface slope (degrees) 6
Conveyor speed (M/s) 0.63 Maximum oversize 680*450
Walking speed (M/s) 0.9 Main motor power (Kw) 15
Ground clearance (mm) 150 drum or cooling motor power (Kw) 5.5
Excavation height (mm) 2050 total power (Kw) 20.5
Digging width (mm) 3000 Safety valve opening pressure (Mp) 13-15
Loading width (mm) 1530 length (mm) 5500
Excavation distance (mm) 1450 width (mm) 1650
Applicable roadway section (m2) 2.2*2.2 or above High (mm) 1700