• Mine

  • Power station

  • Tunnel

  • Mining

  • Aqueducts

  • Electric power

  • Culvert

 

Tire slag remove

当前位置:首页 >Product center >Tire slag remove

120 type wheel slag machine

The 120-type wheel slag slag machine is mainly designed for large roadways. The main advantages of the machine are: The size of the excavation system is equipped with standard and extended type. The length of the standard size arm is 1.05m and 1.0m, and the length of the extended type arm is 1.2m and 1.25m. It is available for users to customize according to the section size of the roadway. It is
详情介绍
The 120-type wheel slag slag machine is mainly designed for large roadways. The main advantages of the machine are:
The size of the excavation system is equipped with standard and extended type. The length of the standard size arm is 1.05m and 1.0m, and the length of the extended type arm is 1.2m and 1.25m. It is available for users to customize according to the section size of the roadway. It is recommended to use standard size arms for 2,6×2.6m2 section roadways, and extended length arms for 3.0×3.0m2 and above sections to improve work efficiency.
The excavation system pin optimization and improvement design adopts the oil-bearing graphite copper sleeve, the square head flange and the shaft end to add the grease structure, and the high-quality grease nozzle is used, which effectively solves the inconvenience of pin shaft lubricating oil filling and the loose rotation lock piece. malfunction.
The bucket plate is changed from 10mm to 12mm, and the inner side of the bucket body is welded with 10mm wear-resistant steel plate layer. The tooth sleeve is made of new wear-resistant steel castings. The gear sleeve and the tooth body coupling shaft pin are replaced by horizontal loading, which is effective. Improve the service life of the bucket to increase strength and durability, prevent the burr of the bucket root from cracking and prolong the service life.
Improved design of baffle, cover and middle baffle in the gantry, increasing the cross section of the mineral material through the section, the size is widened by 30mm, and the height is increased by 50mm. The cross-sectional dimension of the gantry is 760x600mm2 0, the design of the arm cylinder ear is improved, and the length of the weld is improved. Increasing 50mm, the welding process requires double-sided groove opening welding, increasing the welding strength of the cylinder ear, effectively preventing the cylinder ear pull-off accident.
Artificial aging and shot peening of components such as large and small arms, rotary bodies/seats, connecting plates, gantry frames, etc., eliminating welding stress, preventing and reducing part deformation, eliminating surface weld spatter and improving surface quality.
The console console is double-sided welded to prevent desoldering. The bending angle of the front panel of the console is increased, and the edge of the console is restored to prevent the oil pipe from being ground.
Technical Parameters
Project unit main parameters
Model 1.8 m YLTAY-120T
Dimensions mm 5950×2500×2250
Loading quality M3/h ≧120
Machine quality kg 3400
Excavation width mm 3800
Excavation height mm 3700
Excavation depth mm ≦620
Adapt to roadway slope ( 0 ) ≦ 15
Adapt to the minimum section of the roadway mm ≥ 2300
Excavation distance mm 2900
Minimum transition radius ( 0 ) ≦ 5
Maximum boom rotation angle ( 0 ) ≦ 45
Unloading height mm ≦2900
Unloading distance mm 2400 (can be lengthened)
Motor power kw 18.5
Maximum material passing size mm 1000×800
Track mm 1630/1570
Wheelbase mm 1650
(此内容由www.kybzjcj.com提供)
上一个: ZWY1.5-70T-4B-DQL
下一个: ZWY1.5-50T-4B-DQ